Open Box ResMed AirCurve 11 VAuto BiLevel Machine

*A valid prescription is required for the purchase of this product*

Product Description

AirCurve 11 VAuto BiLevel devices treat obstructive sleep apnea and help those who struggle to adhere to positive airway pressure therapy. The ResMed AirCurve 11 VAuto features Easy-Breathe waveform and algorithm. The VAuto continually monitors each individual’s breathing pattern on a breath-by-breath basis. The algorithm makes automatic adjustments to treat individuals effectively and comfortably.

Highlights

• Sleek, Modern Design
• Start/Stop Button
• Removable Water Chamber
• Touchscreen
• AirView/MyAir-
  • Bluetooth connectivity assists with device setup
• Integrated Heated Humidifier
• Disposable Fine Mesh Filter
• Compatible with Standard and ClimateLineAir 11 (heated) Tubing

Modes within the AirCurve 11 VAuto: CPAP, S, VAuto

Operating Pressure Range: 4-25cm H20

The algorithm makes automatic adjustments to treat patients effectively and comfortably throughout the night.

• AutoEPAP:
  • Min EPAP and Max IPAP set the pressure ranges in which the Auto algorithm can operate. This ensures the patients only receives the amount of pressure needed for optimal therapy.
• Pressure Support:
  • PS sets the difference between inspiratory and expiratory pressure.
• Cycle Sensitivity:
  • Default cycle sensitivity is appropriate for most individuals; however, trigger sensitivity can be adjusted if necessary.
• TiControls: 
  • TiControls are appropriate for most individuals; however, adjustments to the Ti min and Ti max are allowed per the individuals clinician.

Climate Control: Designed to make therapy more comfortable by constant temperature and maintaining humidity. Can be set to either Auto or Manual.

• Auto: Recommended and default settings. Adjusts to the humidifier output to maintain constant, comfortable humidity level.
• Manual: Offers more flexibility and control. Temperature and humidity can be adjusted to find the most comfortable setting.
• Rainout may occur.
• Increase the tube temperature, if rainout still consists, decrease the humidity.

Unit Information:

• Touch Screen:
  • Navigates the functions and displays information
• Air Inlet Filter Cover:
  • Removable cover to replace filter
• Start/Stop Button:
  • Press to Start/Stop therapy.
    • LED light will turn green during standby mode and white during therapy, test drive and mask fit functions.
    • LED light will flash white light when a system error has occured.
• SD Card Cover:
  • Removable cover for SD card to remove/inset SD Card.
    • LED light is blue when data is written to the card.
• Cellular Signal Strength:
  • Bars lit up will indicate strength of cellular connectivity
    • No Cellular Connection: X through cellular bars

My Sleep View: 

• Reports the last night’s sleep data:
  • Usage- Hours used last night
  • Events- Number of apnea and hypopnea events per hour of sleep
  • Mask- Displays information on the mask seal.
    • Yellow mark indicates there is information to view about the mask seal. Tap MASK to view.